INSL-X Seal Lock Plus Interior Primer (IL-6800)

USE
  • Primes, seals, and blocks stains on plaster, drywall, wood, metal, and masonry
  • Use a sealer for “hot plaster”, multi-colour finishes and a stain blocker for creosote, asphalt, aniline, tanning bleeding, crayon, ink, redwood. Grease, and knots
  • Use a vapour barrier (perm rating of 0.3)
  • Not for use in immersion surfaces
  • Do not use a top coat containing aromatic hydrocarbons or oxygenated solvents
  • Can be used for exterior spot priming
COVERAGE
  • Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP
  • SEE PRODUCT DATA SHEET FOR COMPLETE PREPARATION AND APPLICATION INSTRUCTIONS
  • Remove grease, dirt, oil, wax, scaling paint, wallpaper paste, and other foreign matter by solvent or detergent cleaning
  • Rinse with clean water and allow to dry thoroughly
  • Remove mildew with a commercial mildewcide
  • Dull glossy surfaces by sanding
  • Fill cracks and nail holes with patching compound, sand smooth and remove dust
APPLICATION
  • Use in a well-ventilated area
  • Stir thoroughly before and during use; 1 coat is usually enough but sometimes a second coat is needed
  • Apply directly from the container
  • Product can be applied by brush, roller, or spray
  • Apply when material, substrate, and ambient temperatures are between 4.4°C (40°F) and 32.2°C (90°F)
  • May be tinted with up to 60 mL (2 oz) per 3.79L of universal colourant
  • DO NOT THIN
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
DRYING
  • Tack free in 15 minutes
  • For multiple-coat application, allow a 2-hour dry time between coats
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Clean equipment with denatured alcohol promptly after use
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • Wash thoroughly after handling
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (IL-6800)

Technical Data Sheet (IL-6800)