INSL-X Prime Lock Plus Interior/Exterior Primer (PS-8000)

USE
  • Primes and seals all interior plaster, drywall, wood, and previously painted or varnished surfaces in commercial, institutional, and residential applications
  • Excellent for use under wall coverings
  • Specially designed to block “bleed through” from common household stains, water stains, smoke and fire damage, soot, crayon, markers, lipstick, ball point pen, and more
  • May be used as an exterior spot primer
  • Spot prime knots with Seal Lock Plus before priming with Prime Lock Plus
COVERAGE
  • Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • *COVERAGE DEPENDS ON THE SURFACE POROSITY AND TEXTURE*
SURFACE PREP
  • SEE PRODUCT DATA SHEET FOR COMPLETE PREPARATION AND APPLICATION INSTRUCTIONs
  • Surface must be clean, free from dirt, grease, oil, wax, mildew, and other foreign matter
  • Wash with warm soapy water, rinsing with clean water. Allow to dry
  • Remove loose, powdery, or peeling paint by wire brushing or scraping
  • Use over most glossy surfaces without sanding
  • Fill cracks and nail holes with patching compound. Allow patch to dry thoroughly
  • *See technical data sheet or ask us how to properly clean mildewed surfaces
APPLICATION
  • Use in a well-ventilated area
  • Stir thoroughly before and during use; 1 coat is usually enough but sometimes a second coat is needed
  • Product can be applied by brush, roller, or spray
  • Apply at full strength for maximum stain blocking and sealing properties
  • Top-coat with interior or exterior latex or oil-alkyd based finishes
  • Stubborn stains may require additional coats
  • May be tinted with up to 59 mL (2 oz) per 3.79L of Universal Colourant
  • Do not apply at temperatures below 7.2 degrees Celsius (45 degrees Fahrenheit)
  • DO NOT THIN
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying

DRYING
  • Tack free in 30 minutes
  • For multiple-coat application, allow a 2-hour dry time between sanding or coats
  • Fully cures in 7-10 days
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Clean equipment with mineral spirits immediately after use
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • Wash thoroughly after handling
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (PS-8000)

Technical Data Sheet (PS-8000)