Krylon Looking Glass Spray Paint

  • Use on clear glass
  • Spray Can (170 grams)- One coat of up to 10 square feet on a solid non-porous surface
  • Apply to a dry surface free of grease, dirt, and oils
  • Spray outdoors or in a well-ventilated area
  • Shake can 1-2 minutes and during use
  • Hold can 8”-10” from surface, spray in sweeping motion side to side with slight overlap
  • Apply 5 very in coats, wait 1 minute between each coat
  • Paint should not come into contact with food or live plants
  • Protect surrounding areas
  • For best results, use when air and surface temperature is between 10°C and 29°C (50°F and 85°F) and humidity is below 85%
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries in 10 minutes or less
  • Handle in 1 hour
  • Recoat anytime
  • Wash thoroughly after handling
  • To prevent clogs, hold can upside down and spray until clear gas appears
  • To clean paint on button, wear eye protection, and wipe off with clean warm water- Do Not stick pin in button opening
  • For Storage and re-use, clear valve by holding can in an upright position pointed away from you, and push the tip to one side for a few seconds to clear out remaining paint
  • Store can inside when not in use
  • In extremely cold temperatures, keep can warm
  • DO NOT heat on stove, in oven, or in microwave
  • Use completely or dispose of properly

Safety Data Sheet (Looking Glass)