Krylon High Heat Max Spray Paint

  • Ideal for grills, BBQ’s, fire pits, wood-burning stoves, and heating radiators
  • Ideal for metal
  • Spray Can (340 grams)- One coat of up to 20 square feet on a solid non-porous surface (one can generally sufficient to coat one BBQ)
  • Surface should be clean, dull, and dry
  • Remove loose paint, rust, dirt, grease, and oil
  • To improve adhesion, sand glossy or rough surfaces until smooth
  • Use outdoors or in a well-ventilated area
  • Shake can for 1-2 minutes before use as well as occasionally during use
  • Test an inconspicuous area first
  • Hold can 10”-12” from surface, spray in sweeping motion from side to side with slight overlap
  • Apply multiple thin coats to avoid runs and slips
  • For best results, use when air and surface temperature is between 16°C and 32°C (60°F and 90°F) and humidity is below 60%
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries to touch in 10 minutes or less
  • Handle after 1 hour
  • Apply additional coats any time
  • Clean valve by holding can upside down and spray until only clear gas comes out
  • If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner- DO NOT stick pin in spray button opening
  • Clean overspray with paint thinner or lacquer thinner, following manufacturer’s instructions
  • Wash hands after using
  • For Storage and re-use, clear valve by holding can in an upright position pointed away from you, and push the tip to one side for a few seconds to clear out remaining paint
  • Store can inside when not in use
  • In extremely cold temperatures, keep can warm
  • DO NOT heat on stove, in oven, or in microwave
  • Use completely or dispose of properly

Safety Data Sheet-Black