Krylon Fluorescent Spray Paint

Bold, fluorescent colours provide high visibility.


  • Glows under ultraviolet (black) light
  • Increases brilliance up to 400%
  • Brightest over white base coat
  • For safety and décor items
  • Ideal for signs, sports equipment, crafts and more
  • Ideal for wood, metal, wicker, wrought iron, glass, plaster, ceramic, paper, and paper-mâché
  • Spray Can (312 grams)- One coat of up to 20 square feet on a solid non-porous surface
  • Surface should be clean, dull, and dry
  • Remove loose paint, rust, dirt, grease, and oil
  • To improve adhesion, sand glossy or rough surfaces until smooth
  • Use outdoors or in a well-ventilated area
  • Shake until ball inside begins to rattle then shake for an additional 2 minutes
  • Test an inconspicuous area first
  • Hold can 8”-10” from surface, spray in sweeping motion from side to side with slight overlap
  • Apply multiple thin coats to avoid runs and drips
  • For best results, use when temperature is between 12°C and 24°C (55°F and 75°F) and humidity is below 60%
  • Note: Applying outside of the above range may impact finish
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries to touch in 15 minutes or less
  • Handle after 2 hours
  • Apply additional coats within 1 hour or after 48 hours
  • Wash thoroughly after handling
  • If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner- DO NOT stick pin in spray button opening
  • Clean overspray with paint thinner or lacquer thinner, following solvent manufacturer’s instructions
  • Wash hands after using
  • For Storage and re-use, clear valve by holding can in an upright position pointed away from you, and push the tip to one side for a few seconds to clear out remaining paint
  • Store can inside when not in use
  • In extremely cold temperatures, keep can warm
  • DO NOT heat on stove, in oven, or in microwave
  • Use completely or dispose of properly