Coronado PVA Flat Primer/Finish (100-11)

 

USE
  • a fast-drying vinyl acrylic primer/finish for interior drywall and thoroughly cured plaster
COVERAGE
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • Pail (18.9 litres)- One coat of approximately 2000 square feet of wall space
  • *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP
  • NEW WORK: Surface to be painted must be clean and free of dust, grease, and wax. Plaster and Masonry must be cured and have a pH of less than 9
  • REPAINT: Surface to be painted must be clean and free of dust, grease, and wax. Remove all loose, scaly paint by sanding and scraping thoroughly
APPLICATION
  • Use in a well-ventilated area
  • For use as a primer, apply one coat allowing 4 hours to dry before applying 1-2 finish coats
  • For use as a primer and finish, apply 2 coats allowing 4 hours to dry between each coat
  • Product can be applied by brush, roller, or spray
  • Apply before and after filling nail holes, cracks, and other surface imperfections. Sand smooth when dry.
  • Do not apply when temperature is below 10°C (50°F)
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
DRYING
  • Dries to touch in 30 minutes
  • Allow 4 hours between coats
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Use soap and warm water; wash thoroughly after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS