Benjamin Moore Eco Spec Interior Paint

USE

• Ideally suited for commercial, facility management, and residential applications
• New or previously painted wallboard, plaster, masonry, or wallpapered services
• Primed or previously painted wood or metal
• New or coated acoustic ceilings

COVERAGE

• Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
• *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

• Surfaces to be painted must be clean, dry, and free of wax, grease, scaling paint, and mildew
• Glossy areas should be dulled
• Remove wall covering if there is evidence of bleeding colours

PRIMING

• Primer can be used when there is a significant colour change, new drywall, or painting over oil paint
• Ask about a special purpose primer if the surface to be painted is water stained, smoke damaged, grease stained, or very slick
• Certain deep base colours may require a deep base primer

APPLICATION

• Use in a well-ventilated area
• Use product when surface temperature is above 10°C (50°F)
• Stir thoroughly before use; apply 2 coats
• Apply generously from unpainted area into wet area
• Product can be applied by brush, roller, spray
• May be thinned with up to ¼ litre of K518 Extender or water per 3.79L
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying

DRYING

• Dries to touch in 30 minutes to an hour
• Recoat after 1-2 hours
• Painted surfaces will be fully cured after 2-3 weeks
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Use soap and warm water; wash thoroughly after handling
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Base 4 (F373-4X)     Safety Data Sheet-Base 4 (F374-4X)     Safety Data Sheet-Base 4 (F375-4X)     Safety Data Sheet-Base 4 (F376-4X)