Benjamin Moore Collection Interior Alkyd Satin Enamel Paint (F235)

  • Recommended for use on metal and substrates such as steel, wrought iron, and aluminum
  • Do not apply directly to galvanized metal
  • Note: all alkyd-based enamels experience a certain amount of yellowing. This effect is accelerated in dark or poorly ventilated areas
  • Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • *Coverage may vary depending on the surface porosity and texture*
  • Surfaces to be painted must be clean, dry, and free of rust, grease, wax, scaling paint, and mildew
  • Glossy areas should be dulled
  • Can be applied directly to properly prepared metal surfaces or used in combination with a metal primer
  • If the surface to be painted is water-stained, smoke damaged, grease stained or very slick, use a special purpose primer
  • Use in a well-ventilated area
  • Use product when surface temperature is above 10°C (50°F)
  • Stir thoroughly before use; apply 2 coats
  • A minimum of 2 coats is required on bare metal surfaces
  • Product can be applied by brush, roller, or spray
  • Apply paint generously from unpainted area into wet area
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries to touch in 4 hours
  • Recoat after 12 hours
  • Painted surfaces can be washed after curing for 2-3 weeks
  • Humidity and temperature may prolong dry, recoat, and cure times
  • Clean up tools and spills immediately with mineral spirits; absorb spills with inert material and dispose of in accordance with local regulations
  • Wash thoroughly after handling
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly

Safety Data Sheet-Base 4 (F235-4B)

Technical Data Sheet (F235)