Benjamin Moore Ultra Flat Ceiling Paint (K508)

  • New or previously painted wallboard, cured plaster or masonry, or wallpapered ceiling surfaces
  • Primed or previously painted wood or metal ceilings
  • New or coated acoustic ceilings
  • The ultra flat finish of this product means that it is not suitable for surfaces that require cleaning or are subject to abrasion
  • Quart (946 millilitres)- One coat of approximately 100 square feet of ceiling space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of ceiling space
  • Pail (18.9 litres)- One coat of approximately 2000 square feet of ceiling space
  • *Coverage may vary depending on the surface porosity and texture*

  • Surfaces to be painted must be clean, dry, and free of wax, grease, scaling paint, and mildew
  • Glossy areas should be dulled
  • Remove wall covering if there is evidence of bleeding colours
  • Primer can be used when there is a significant colour change, new drywall, or painting over oil paint
  • Ask about special purpose primers for wood, plaster, masonry, and metal surfaces or if the surface to be painted is stained, smoke damaged, or very slick
  • Certain deep base colours may require a deep-base primer
  • Use in a well-ventilated area
  • Use product when surface temperature is above 10°C (50°F)
  • Stir thoroughly before use; apply 2 coats
  • Apply generously from unpainted area into wet area
  • Product can be applied by brush, roller, or spray
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries to touch in 1 hour
  • Recoat after 1-2 hours
  • Painted surfaces will be cured after 2-3 weeks
  • Humidity and temperature may prolong dry, recoat, and cure times
  • Use soap and warm water; wash thoroughly after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly

Safety Data Sheet-Base 4 (K508-4X)

Technical Data Sheet (K508)