Benjamin Moore Remove- Finish Remover (K315)

USE

• Strips stains and finishes from exterior wood
• Also removes stains from mould, mildew, algae, dirt and water, restoring the natural wood tone
• Ideal for use on exterior wood decking, siding, fencing, shakes, and furniture
• Product does not control mould, mildew, fungus, or algae; only removes stains

COVERAGE

• Size: 3.78 litres
• Undiluted- 1 Gallon (3.78 litres) will cover approximately 9.29-18.58 square metres (100-200 square feet)
• Diluted- (max 5 cans of 3.78 litres of water) will cover approximately 46.45-92.90 square metres (500-1000 square feet)

PRIOR TO APPLICATION

• Determine proper dilution following the chart in the “Mixing” tab
• Test a small, inconspicuous area and allow to dry before general use
• Before and after application, liberally spray surrounding plants and vegetation with water
• Avoid contact with metal, lawn furniture, and fabric
• If necessary, protect adjacent surface with plastic

MIXING

• This product is a concentrate
• This container makes up to 5 cans of 3.78L of product

APPLICATION

1. Apply product liberally to surface with plastic garden sprayer, brush, or roller
2. Allow solution to stand for 10-30 minutes, depending on age and type of finish to be removed
3. Agitate with stiff bristle brush in direction of wood grain and rinse using a garden hose with nozzle or power washer
4. Neutralize surface with Benjamin Moore Brighten- Brightener and Neutralizer (K317) following label directions
5. Allow to dry thoroughly. Note: when applying to vertical surfaces, apply from bottom to top

• Use in a well-ventilated area
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

CLEAN UP & STORAGE

• Thoroughly rinse all applicators and equipment with water
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
• Wash thoroughly after handling
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (K315)

Technical Data Sheet (K315)