Benjamin Moore Aura Interior Paint

  • New or previously painted wallboard, plaster, masonry or wallpapered surfaces
  • Primed or previously painted wood or metal
  • New or coated acoustic ceilings
  • Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • *Coverage may vary depending on the surface porosity and texture*
  • Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, wax, mildew and scaling paint
  • Glossy areas should be dulled (most of the time using sandpaper)
  • Remove wall covering if there is evidence of bleeding colours
  • Self-priming for most surfaces
  • A separate primer can be used when there is a significant colour change, new drywall, or painting over oil paint
  • Ask about a special purpose primer if surface to be painted is water-stained, smoke damaged, grease stained or very slick
  • Certain deep custom colours may require a deep base primer
  • Use in a well-ventilated area
  • Do not thin with water
  • Never add other paints or solvents
  • Apply generously from unpainted area into wet area
  • Do not apply when air and surface temperature is below 10°C (50°F)
  • Stir thoroughly before use; apply two coats
  • Product can be applied by brush, roller, or spray
  • Benjamin Moore K518 extender may be necessary under certain conditions to adjust open time or spray characteristics
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
  • Dries to touch in 2 hours, recoat after 4-6 hours
  • Painted surfaces can be washed after 2 weeks
  • Humidity and temperature may prolong dry, recoat, and cure times
  • Use soap and warm water; wash thoroughly after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
Flat                                                   Eggshell                                              Satin                                                Semi-Gloss

Safety Data Sheet-Base 4 (F522-4X)     Safety Data Sheet-Base 4 (F524-4X)     Safety Data Sheet-Base 4 (F526-4X)     Safety Data Sheet-Base 4 (F528-4X)

(Previous Product Formulas)
Flat                                                   Eggshell                                              Satin                                                Semi-Gloss

Safety Data Sheet-Base 4 (K522-4X)     Safety Data Sheet-Base 4 (K524-4X)     Safety Data Sheet-Base 4 (K526-4X)     Safety Data Sheet-Base 4 (K528-4X)