Minwax Pre-Stain Wood Conditioner

USE
  • Ideal for treating on clean, raw wood
  • Product helps prevent blotching and streaking
COVERAGE
  • Quart (946 millilitres)- One coat of approximately 125 square feet of surface space
  • *Coverage may vary depending on the type, age, and texture of substrate as well as the application method*
APPLICATION
  • Use in a well-ventilated area
  • Apply using a brush or cloth
  • Cover entire wood surface especially the edges
  • Allow to penetrate for 5 to 15 minutes, then remove any excess with clean, dry cloth
  • Apply an oil-based stain within 2 hours of application of this product
  • Note: this product is not recommended with water-based stains
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
CLEAN UP & STORAGE
  • Clean equipment with mineral spirts or pain thinner, following manufacturer’s safety instructions
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • Wash thoroughly after handling
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (Pre-Stain Wood Conditioner)

Technical Data Sheet (Pre-Stain Wood Conditioner)