Krylon Green Glowz Spray Paint

USE
  • Ideal for wood, metal, plastic, paper-mâché, glass, plaster, ceramic, fabric, dried/silk flowers, paper, wicker, and more
COVERAGE
  • Spray Can (170 grams)- One coat of up to 7 square feet of surface space
SURFACE PREP
  • Surface should be clean, dull, and dry
  • Remove loose rust and paint with wire brush or sand paper
  • Apply products per manufacturer’s instructions and allow to dry
APPLICATION
  • Spray outdoors or in a well-ventilated area
  • Shake can 1-2 minutes before use as well as occasionally during use
  • Hold can 10”-12” from surface, spray in sweeping motion side to side with slight overlap
  • Apply multiple thin coats, wait 1 minute between each coat
  • Surface will glow after several light coats and exposure to light
  • For best results, use when air and surface temperature is between 10°C and 29°C (50°F and 85°F)
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
DRYING
  • Dries in 15 minutes or less
  • Handle in 1 hour
  • Recoat anytime
CLEAN UP & STORAGE
  • Wash thoroughly after handling
  • To prevent clogs, hold can upside down and spray until clear gas appears
  • To clean paint on button, wear eye protection, and wipe off with lacquer thinner- DO NOT stick pin in button opening
  • For Storage and re-use, clear valve by holding can in an upright position pointed away from you, and push the tip to one side for a few seconds to clear out remaining paint
  • Store can inside when not in use
  • In extremely cold temperatures, keep can warm
  • DO NOT heat on stove, in oven, or in microwave
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Green