Benjamin Moore ben Interior Paint

USE

• New or previously painted wallboard and masonry surfaces, primed or previously painted plaster, wood, metal, or wall papered surfaces, new or coated acoustic ceilings

COVERAGE

• Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
• Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
• Pail (18.9 litres)- One coat of approximately 2000 square feet of wall space
• *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

• Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, wax, mildew and scaling paint
• Glossy areas should be dulled (most of the time using sandpaper)
• Remove wall covering if there is evidence of bleeding colours

PRIMING

• Self-priming for most surfaces
• A separate primer can be used when there is a significant colour change, new drywall, or painting over oil paint
• Ask about a special purpose primer if the surface to be painted is water-stained, smoke damaged, grease stained, or very slick
• Certain deep custom colours may require a deep base primer

APPLICATION

• Use in a well-ventilated area
  
• Use product when surface temperature is above 10°C (50°F)
• Stir thoroughly before use; apply 2 coats
• Product can be applied by brush, roller, or spray
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

DRYING

• Dries to touch in 2 hours, recoat after 4-6 hours
• Painted surfaces can be washed after curing for 2-3 weeks; flat finish is not washable
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Use soap and warm water; wash thoroughly after handling
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Base 4 (K625-4X)     Safety Data Sheet-Base 4 (K626-4X)     Safety Data Sheet-Base 4 (K627-4X)     Safety Data Sheet-Base 4 (K628-4X)