INSL-X Prime Lock Plus Interior/Exterior Primer (PS-8000)

USE

• Primes and seals all interior plaster, drywall, wood, and previously painted or varnished surfaces in commercial, institutional, and residential applications
• Excellent for use under wall coverings
• Specially designed to block “bleed through” from common household stains, water stains, smoke and fire damage, soot, crayon, markers, lipstick, ball point pen, and more
• May be used as an exterior spot primer
• Spot prime knots with Seal Lock Plus before priming with Prime Lock Plus

COVERAGE

• Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
• Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
• *COVERAGE DEPENDS ON THE SURFACE POROSITY AND TEXTURE*

SURFACE PREP

• SEE PRODUCT DATA SHEET FOR COMPLETE PREPARATION AND APPLICATION INSTRUCTIONs
• Surface must be clean, free from dirt, grease, oil, wax, mildew, and other foreign matter
• Wash with warm soapy water, rinsing with clean water. Allow to dry
• Remove loose, powdery, or peeling paint by wire brushing or scraping
• Use over most glossy surfaces without sanding
• Fill cracks and nail holes with patching compound. Allow patch to dry thoroughly
• *See technical data sheet or ask us how to properly clean mildewed surfaces

APPLICATION

• Use in a well-ventilated area
  
• Stir thoroughly before and during use; 1 coat is usually enough but sometimes a second coat is needed
• Product can be applied by brush, roller, or spray
• Apply at full strength for maximum stain blocking and sealing properties
• Top-coat with interior or exterior latex or oil-alkyd based finishes
• Stubborn stains may require additional coats
• May be tinted with up to 59 mL (2 oz) per 3.79L of Universal Colourant
• Do not apply at temperatures below 7.2 degrees Celsius (45 degrees Fahrenheit)
• DO NOT THIN
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  
  

DRYING

• Tack free in 30 minutes
• For multiple-coat application, allow a 2-hour dry time between sanding or coats
• Fully cures in 7-10 days
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Clean equipment with mineral spirits immediately after use
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
• Wash thoroughly after handling
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (PS-8000)

Technical Data Sheet (PS-8000)