Benjamin Moore Muresco Flat Ceiling Paint (K258)

USE
  • New and previously painted plaster, wallboard, masonry, wallpapered surfaces, acoustical material, textured ceilings, and most other structural surfaces
COVERAGE
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of ceiling space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of ceiling space
  • Pail (18.9 litres)- One coat of approximately 2000 square feet of ceiling space
  • *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP
  • Surfaces to be painted must be clean, dry, and free of grease, wax, scaling paint and mildew
  • Glossy areas should be dulled with sandpaper
  • Nail holes, cracks, and blemishes should be filled after prime coat is applied, then spot primed with same primer
  • New plaster and masonry must be cured before painting
PRIMING
  • self priming for most surfaces
  • A separate primer can be used when painting over oil paint
  • If the surface to be painted is water-stained, smoke damaged, grease stained or very slick, use a special purpose primer
APPLICATION
  • Use in a well-ventilated area
  • Use product when surface temperature is above 10°C (50°F)
  • Stir thoroughly before use; apply 2 coats
  • For best results, use a premium latex paint applicator; can be applied by brush, roller, or spray
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
DRYING
  • Dries to touch in 1 hour
  • Recoat after 2 hours
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Use soap and warm water; wash thoroughly immediately after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (K258)

Technical Data Sheet (K258)