Benjamin Moore Collection Interior Alkyd Satin Enamel Paint (F235)

USE

• Recommended for use on metal and substrates such as steel, wrought iron, and aluminum
• Do not apply directly to galvanized metal
• Note: all alkyd-based enamels experience a certain amount of yellowing. This effect is accelerated in dark or poorly ventilated areas

COVERAGE

• Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
• Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
• *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

• Surfaces to be painted must be clean, dry, and free of rust, grease, wax, scaling paint, and mildew
• Glossy areas should be dulled

PRIMING

• Can be applied directly to properly prepared metal surfaces or used in combination with a metal primer
• If the surface to be painted is water-stained, smoke damaged, grease stained or very slick, use a special purpose primer

APPLICATION

• Use in a well-ventilated area
• Use product when surface temperature is above 10°C (50°F)
• Stir thoroughly before use; apply 2 coats
• A minimum of 2 coats is required on bare metal surfaces
• Product can be applied by brush, roller, or spray
• Apply paint generously from unpainted area into wet area
• DO NOT THIN
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

DRYING

• Dries to touch in 4 hours
• Recoat after 12 hours
• Painted surfaces can be washed after curing for 2-3 weeks
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Clean up tools and spills immediately with mineral spirits; absorb spills with inert material and dispose of in accordance with local regulations
• Wash thoroughly after handling
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Base 4 (F235-4B)

Technical Data Sheet (F235)