Benjamin Moore Aura Interior Paint

USE

• New or previously painted wallboard, plaster, masonry or wallpapered surfaces
• Primed or previously painted wood or metal
• New or coated acoustic ceilings

COVERAGE

• Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
• Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
• *Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

• Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, wax, mildew and scaling paint
• Glossy areas should be dulled (most of the time using sandpaper)
• Remove wall covering if there is evidence of bleeding colours

PRIMING

• Self-priming for most surfaces
• A separate primer can be used when there is a significant colour change, new drywall, or painting over oil paint
• Ask about a special purpose primer if surface to be painted is water-stained, smoke damaged, grease stained or very slick
• Certain deep custom colours may require a deep base primer

APPLICATION

• Use in a well-ventilated area
  
• Do not thin with water
• Never add other paints or solvents
• Apply generously from unpainted area into wet area
• Do not apply when air and surface temperature is below 10°C (50°F)
• Stir thoroughly before use; apply two coats
• Product can be applied by brush, roller, or spray
• Benjamin Moore K518 extender may be necessary under certain conditions to adjust open time or spray characteristics
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

DRYING

• Dries to touch in 2 hours, recoat after 4-6 hours
• Painted surfaces can be washed after 2 weeks
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Use soap and warm water; wash thoroughly after handling
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Base 4 (K522-4X)     Safety Data Sheet-Base 4 (K524-4X)     Safety Data Sheet-Base 4 (K526-4X)     Safety Data Sheet-Base 4 (K528-4X)