Benjamin Moore Aura Bath and Spa Matte Interior Acrylic Paint (K532)

USE
  • Designed for use in bathrooms and saunas
  • Recommended for new or previously painted wallboard, plaster, masonry, or wallpapered surfaces; primed or previously painted wood or metal; new or coated acoustic ceilings.
  • Provides a mildew resistant coating
COVERAGE
  • Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
  • Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
  • *Coverage may vary depending on the surface porosity and texture*
SURFACE PREP
  • Surfaces to be painted must be clean, dry, and free of wax, grease, scaling paint and mildew
  • Glossy areas should be dulled
  • Remove wall covering if there is evidence of bleeding colours
PRIMING
  • Self-priming for most surfaces
  • A separate primer can be used when there is a significant colour change, new drywall, or painting over oil paint
  • Ask about special purpose primers for specific surfaces or if the surface to be painted is water stained, smoke damaged, or very slick
APPLICATION
  • Use in a well-ventilated area
  • Stir thoroughly before use; apply 2 coats
  • Do not thin with water
  • Never add other paints or solvents
  • Apply generously from unpainted area into wet area
  • Product can be applied by brush, roller, and spray
  • Do not apply when air and surface temperatures are below 10°C (50°F)
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying

DRYING
  • Dries to touch and can be recoated after 1 hour
  • Painted surfaces can be washed after curing for a minimum of 2-3 weeks
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Promptly use soap and warm water; wash thoroughly after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Base 4 (K532-4X) 

Technical Data Sheet (K532)