My shopping cart
Your cart is currently empty.
Continue ShoppingBenjamin Moore ARBORCOAT Premium Exterior Stain- Translucent (Y623)
USE
- For use on decks, fences, siding, and furniture
- Ideal for soft and hardwoods including redwood and ipe
COVERAGE
- Gallon (3.79 litres)- One coat of approximately 200-400 square feet of surface space
- *Coverage may vary depending on the type, age, and texture of substrate as well as the application method*
SURFACE PREP
- Optimal performance is achieved when the product is applied to a clean, dry, and absorbent wood substrate
- This product must be able to penetrate
- After prep is complete, test for penetration by applying a few drops of water to the dry substrate
- If the water does not quickly penetrate, repeat prep
- This product can also be applied to decks previously stained with a transparent stain that is weathered but is not flaking or peeling
- If the existing stain is flaking or peeling, it should be removed prior to staining
- Previously stained surfaces should be cleaned with a Multi purpose cleaner (K318) and allowed to dry thoroughly before staining
APPLICATION
- Always test a small area for colour, penetration, and drying before proceeding
- In can, colour may differ from final dried finish
- Stir thoroughly before and occasionally during use
- For optimal durability and uniformity, a 2-coat application is recommended
- Wait for the first coat to dry thoroughly before recoating
- Stain can be applied by brush, roller, pad applicator, or spray
- Roller application followed by back brushing is the recommended procedure
- Applying the finish too heavily will prevent optimum cure
- Use product when surface temperature is above 4.4°C(40°F)
- Do not apply in direct sunlight
- Keep container closed when not in use
- Keep out of reach of children
- It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
- It is recommended that pregnant women are not present when product is being applied and drying
DRYING
- Dries to touch in 30 minutes
- Dry time: 1-3 hours
- When use as a deck stain, allow to dry for 24 hours before putting furniture back and returning the deck to service
- Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
- Use soap and warm water; wash thoroughly after handling
- In case of spillage, absorb with inert material and dispose of in accordance with local regulations
- When storing, tightly close container and store upside down
- Store in a well-ventilated area
- Do not store near heat, sparks, open flame, or other sources of ignition
- Protect from freezing
- Use completely or dispose of properly