Benjamin Moore ARBORCOAT Classic Oil Exterior Stain- Semi Solid (K329)

USE

• For wood decking, siding, fencing, shakes, and furniture

COVERAGE

• Gallon (3.79 litres)- One coat of approximately 200-350 square feet of surface space
• *Coverage may vary depending on the type, age, and texture of substrate as well as the application method*

SURFACE PREP

• Remove previous coating completely
• This product must be able to penetrate wood
• Surfaces must be clean and mildew free
• Mill glaze must be removed

APPLICATION

• Always test a small area for colour, opacity, penetration, and drying before preceding
• DO NOT THIN
• Stir thoroughly before and occasionally before use
• On smooth siding or deck surfaces, apply one thin coat by brush or stain pad, allowing the stain to penetrate into the wood
• On rough siding, apply 1 or 2 coats as needed
• Apply a second coat if required, wet on wet within 10 minutes of the application of the first coat
• Applying the finish too heavily or applying over a sealed surface will result in slow dry times and uneven finish
• Use product when surface temperature is above 10°C (50°F)
• Do not apply in direct sunlight, over damp surfaces, or during threatening weather
• Keep container closed when not in use
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

DRYING

• Dries to touch in 6-8 hours
• Decks: allow finish to cure 24-48 hours
• Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

• Clean brushes and equipment with mineral spirits
• In case of spillage, absorb with inert material and dispose of in accordance with local regulations
• Wash thoroughly after handling
  
• When storing, tightly close container and store upside down
• Store in a well-ventilated area
• Do not store near heat, sparks, open flame, or other sources of ignition
• Protect from freezing
  
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet (K329-06)

Technical Data Sheet (K329)