Krylon Green Glowz Spray Paint

USE

• Ideal for wood, metal, plastic, paper-mâché, glass, plaster, ceramic, fabric, dried/silk flowers, paper, wicker, and more

COVERAGE

• Spray Can (170 grams)- One coat of up to 7 square feet of surface space

SURFACE PREP

• Surface should be clean, dull, and dry
• Remove loose rust and paint with wire brush or sand paper
• Apply products per manufacturer’s instructions and allow to dry

APPLICATION

• Spray outdoors or in a well-ventilated area
• Shake can 1-2 minutes before use as well as occasionally during use
• Hold can 10”-12” from surface, spray in sweeping motion side to side with slight overlap
• Apply multiple thin coats, wait 1 minute between each coat
• Surface will glow after several light coats and exposure to light
• For best results, use when air and surface temperature is between 10°C and 29°C (50°F and 85°F)
• Keep out of reach of children
• It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
• It is recommended that pregnant women are not present when product is being applied and drying
  

DRYING

• Dries in 15 minutes or less
• Handle in 1 hour
• Recoat anytime

CLEAN UP & STORAGE

• Wash thoroughly after handling
  
• To prevent clogs, hold can upside down and spray until clear gas appears
• To clean paint on button, wear eye protection, and wipe off with lacquer thinner- DO NOT stick pin in button opening
• For Storage and re-use, clear valve by holding can in an upright position pointed away from you, and push the tip to one side for a few seconds to clear out remaining paint
• Store can inside when not in use
• In extremely cold temperatures, keep can warm
• DO NOT heat on stove, in oven, or in microwave
• Use completely or dispose of properly

SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Green