Benjamin Moore ARBORCOAT Premium Exterior Stain- Semi Solid (K639)

USE
  • For wood decking, siding, fencing, shakes, and furniture
  • Ideal for softwoods like cedar and pine
  • Not recommended for hardwood
COVERAGE
  • Gallon (3.79 litres)- One coat of approximately 300-400 square feet of surface space
  • *Coverage may vary depending on the type, age, and texture of substrate as well as the application method*
SURFACE PREP
  • Existing stained substrates in good sound condition should be cleaned with (k318) Multi purpose cleaner
  • Painted substrates must be stripped
  • After prep is complete, test for penetration by applying a few drops of water to dry substrate
  • If the water does not quickly penetrate, repeat prep
  • Surfaces, including eaves and overhangs, must be clean and mildew free
  • Mill glaze must be removed
APPLICATION
  • Always test a small area for colour, penetration, and drying before proceeding
  • In can, colour may differ from the final dried finish
  • Stir thoroughly before and occasionally during use
  • Generally, one coat of stain is sufficient on properly prepared substrates
  • Product can be applied by brush, roller pad applicator, or spray
  • Roller application followed by back brushing is the recommended procedure
  • Applying the finish too heavily will prevent optimum cure
  • Use product when surface temperature is above 4.4°Celsius (40°F)
  • Do not apply in direct sunlight
  • Keep container closed when not in use
  • Keep out of reach of children
  • It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
  • It is recommended that pregnant women are not present when product is being applied and drying
DRYING
  • Dries to touch in 30 minutes
  • Can be recoated after 3-4 hours
  • When used as a deck stain, allow to dry for 48 hours before putting furniture back and returning deck to service
  • Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
  • Use soap and warm water; wash thoroughly after handling
  • In case of spillage, absorb with inert material and dispose of in accordance with local regulations
  • When storing, tightly close container and store upside down
  • Store in a well-ventilated area
  • Do not store near heat, sparks, open flame, or other sources of ignition
  • Protect from freezing
  • Use completely or dispose of properly
SAFETY & TECHNICAL DATA SHEETS

Safety Data Sheet-Tint Base (K639-06)

Technical Data Sheet (K639)