A premium quality, waterborne alkyd paint that offers a full line of durable high-end finishes ideal for doors, trim, and cabinetry
Features
Exceptional application and feel
Outstanding coverage and hide
Cures to a hard, furniture-quality finish
Tinted with Benjamin Moore’s proprietary waterborne colourants
Low VOC even after tinting
Available in thousands of colours
Resin Type: Water Reducible Alkyd
$40.99
USE
A premium quality, inter waterborne alkyd enamel coating that dries to a smooth, hard finish.
Advance provides a finish that is equal to the best solvent-thinned alkyd finishes.
Recommended for properly primed interior surfaces of wood, cured plaster, wallboard, metal, and masonry.
Ideal for new and previously painted interior trim, doors, walls, ceilings, and furniture
COVERAGE
Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
*Coverage may vary depending on the surface porosity and texture*
SURFACE PREP
Surfaces must be clean, dry, and free of grease, wax, dust, mildew, rust, and loose and scaling paint.
Glossy surfaces should be dulled
New plaster and masonry must be thoroughly cured before priming
PRIMING
Advance can be applied over an oil or latex primer
Ask about special purpose primers for wood, drywall substrates, plaster, masonry, and metal surfaces or if the surface to be painted is stained, smoke damaged, or very slick
Certain deep custom colours may require a deep base primer
APPLICATION
Use in a well-ventilated area
Do not apply when air and surface temperatures are below 10°C (50°F)
Stir thoroughly before and during use; Apply 2 coats
This product can be applied by brush, roller, and spray
Keep container closed when not in use
Keep out of reach of children
It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
It is recommended that pregnant women are not present when product is being applied and drying
DRYING
Dries to touch in 4-6 hours; allow 16 hours to dry before sanding and applying second coat
Advance’s full hardness and adhesion develops over time
Do not expose to heavy abrasion or return shelves/table tops to service for at least 3-5 days to prevent damage to the finish
Humidity and temperature may prolong dry, recoat, and cure times
CLEAN UP & STORAGE
Clean up with soap and warm water; wash thoroughly after handling
Brushes and rollers should be given a final rinse with mineral spirits to remove residual alkyd
Spray equipment should be given a final rinse with mineral spirits to prevent rusting
In case of spillage, absorb with inert material and dispose of in accordance with local regulations
When storing, tightly close container and store upside down
Store in a well-ventilated area
Do not store near heat, sparks, open flame, or other sources of ignition