Coronado Rust Scat Alkyd Interior/Exterior Paint

Coronado Rust Scat Alkyd Interior/Exterior Paint

A rust preventative coating that delivers exceptional hardness and durability. Formulated with a urethane-modified alkyd resin, it can be applied to interior or exterior ferrous or non-ferrous metals (Not intended for use over galvanized metal).

Features

Easy application
Tenacious adhesion
Excellent wetting properties
Cures to a durable, attractive finish
Can be applied over painted surfaces
Resin Type: Alkyd

$38.99

Select Sheen *

Select Size *

Select Sheen *:

Semi-Gloss (31) Crossed Out

Gloss (13) Crossed Out

Select Size *:

Quart (946 ml) Crossed Out

Gallon (3.79 L) Crossed Out

*PLEASE NOTE*

- CSP colours are only available in Benjamin Moore Aura Interior Paint. If a sample of a CSP colour or any other colour is desired, please order it in the Benjamin Moore Paint Colour Sample 236 ml (K200)

- Colours should never be finalized on a screen

- Colours and sheens should always be finalized in person

- A colour on a screen may look different in person

- Tinted paint is non-refundable and non-returnable

I understand the above and agree with the terms of service

USE

A durable rust preventative coating for metal substrates in commercial, institutional, and residential applications
Not recommended for immersion service

COVERAGE

Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
*Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

SEE PRODUCT DATA SHEET FOR COMPLETE PREPARATION AND APPLICATION INSTRUCTIONS
Surface must be clean, free from dirt, dust, grease, oil, wax, rust, mildew, and other foreign matter
Sand or scrape to remove loose, powdery, or peeling paint
Fill cracks and nail holes with patching compound
Glossy surfaces must be sanded
Remove rust by wire brushing, sanding, or scraping
Remove wax by solvent cleaning

PRIMING

This product can be used direct to metal on ferrous metal surfaces
Ferrous metal: for best corrosion resistance, use a rust inhibitive metal primer
Galvanized and non ferrous metals: use an acrylic bonding primer

APPLICATION

Use outdoors or in a well-ventilated area
Stir thoroughly with a circular, lifting motion to secure even pigment dispersion; apply 2 coats
Product can be applied by:
- Roller- use a short nap mohair cover
- Brush- use a natural hair bristle brush for best results
- Spray- may be sprayed using conventional or airless equipment
Thinning is not recommended
Apply only when surface and air temperatures are between 7.2°C to 35°C (45°F to 95°F)
Do not apply if rain is threatening or if the temperature is within 5 degrees of the dew point and falling
Keep container closed when not in use
Keep out of reach of children
It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
It is recommended that pregnant women are not present when product is being applied and drying

DRYING

Tack free in 1-2 hours
Recoat after 24 hours
Fully cures in 10 days
Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

Tools and equipment should be cleaned with mineral spirits
In case of spillage, absorb with inert material and dispose of in accordance with local regulations
Wash thoroughly after handling
When storing, tightly close container and store upside down
Store in a well-ventilated area
Do not store near heat, sparks, open flame, or other sources of ignition
Protect from freezing
Use completely or dispose of properly