Benjamin Moore REGAL Select High Build Exterior Paint

Benjamin Moore REGAL Select High Build Exterior Paint

An exceptionally thick, high-build, 100% acrylic formula that bridges small cracks and voids in fewer coats

Features

High build for superior coverage
Sag-resistant formula up to 20 mils wet which allows application of a thicker coating across a variety of substrates, including wood, vinyl/PVC, masonry, and fibre cement board
Excellent flow and levelling offers less drag for a smooth, high-build finish across all sheens
Flexible high-build formula bridges small cracks and covers minor surface imperfections
Breathable film that lets internal moisture escape, minimizing potential blistering and peeling
Protects against harsh weather conditions, including wind-driven rain
Low temperature application down to 1.7°C (35°F) extends the painting season
Provides a mildew-resistant coating
Available in thousands of colours
Resin Type: 100% Acrylic Latex

$105.99

Select Sheen *

Select Size *

Select Sheen *:

Flat (K400) Crossed Out

Low Lustre (K401) Crossed Out

Soft Gloss (F403) Crossed Out

Select Size *:

Gallon (3.79 L) Crossed Out

Quart (946 ml) Crossed Out

*PLEASE NOTE*

- CSP colours are only available in Benjamin Moore Aura Interior Paint. If a sample of a CSP colour or any other colour is desired, please order it in the Benjamin Moore Paint Colour Sample 236 ml (K200)

- Colours should never be finalized on a screen

- Colours and sheens should always be finalized in person

- A colour on a screen may look different in person

- Tinted paint is non-refundable and non-returnable

I understand the above and agree with the terms of service

USE

A premium quality, high build, 100% acrylic exterior paint recommended for wood, hardboard, vinyl, and aluminum siding, shakes, unglazed brick, concrete, stucco, cinder blocks, and primed metal

COVERAGE

Quart (946 millilitres)- One coat of approximately 100 square feet of wall space
Gallon (3.79 litres)- One coat of approximately 400 square feet of wall space
*Coverage may vary depending on the surface porosity and texture*

SURFACE PREP

All surfaces, including eaves and overhangs, must be clean and mildew free
Dully glossy areas
Remove chalking, loose, or scaling paint

PRIMING

This product is self-priming on most substrates
Primer can be used when there is a significant colour change, new drywall, or painting over oil paint
Ask about special purpose primers if the surface to be painted is water stained, extremely chalky, or very slick
Spot prime stained areas, nail holes, and bare spots
Prime before caulking and re-prime over caulked areas before applying finish coat
Tannin rich woods like cedar and redwood may require a second coat of primer

APPLICATION

Use product when surface temperature is above 4.4°C (40°F)
Stir well before use; apply 2 coats
Product can be applied by brush, roller, or spray
Do not paint vinyl siding or trim darker than the original colour
Keep container closed when not in use
Keep out of reach of children
It is recommended that anyone who is applying the product or present during application of this product, especially those who are asthmatic, follow the manufacturer's safety precautions
It is recommended that pregnant women are not present when product is being applied and drying

DRYING

Dries to touch in 1 hour
Can be recoated after 4 hours
Humidity and temperature may prolong dry, recoat, and cure times

CLEAN UP & STORAGE

Use soap and warm water; wash thoroughly after handling
In case of spillage, absorb with inert material and dispose of in accordance with local regulations
When storing, tightly close container and store upside down
Store in a well-ventilated area
Do not store near heat, sparks, open flame, or other sources of ignition
Protect from freezing
Use completely or dispose of properly